TM 5-3805-291-23-2
TRANSMISSION OIL PUMP (GEAR PUMP) REPLACEMENT - CONTINUED
0206 00
REMOVAL - CONTINUED
9.
Attach lifting equipment to oil pump (19).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Oil pump weighs 80 lb (36 kg).
10.
Remove seven bolts (20) and three washers (21) from
oil pump (19).
11.
Remove oil pump (19) and O-ring (22) from torque
converter (23). Discard O-ring.
427-C1001
INSTALLATION
1.
Attach lifting equipment to oil pump (19).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Oil pump weighs 80 lb (36 kg).
Apply a thin coat of clean oil to all O-rings before installation.
2.
Lubricate new O-ring (22) with clean oil and install O-ring and oil pump (19) on torque converter (23).
3.
Install three washers (21) and seven bolts (20) on oil pump (19).
0206 00-3