TM 5-3805-291-23-2
REAR AXLE TRUNNION REPLACEMENT - CONTINUED
0209 00
INSTALLATION - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Rear support weighs 100 lb (45 kg).
6.
Attach lifting equipment to rear support (4).
7.
With assistance, install rear support (4) on trunnion
(10).
427-C0516
8.
Lubricate thrust washers (5 and 9) with grease.
9.
Install thrust washer (9), plate (8), thrust washer (5),
four washers (7), and bolts (6) on trunnion (10).
Tighten bolts to 420 60 lb-ft (570 80 Nm).
427-C0515
0209 00-6
