4
TM 5-3805-291-23-2
INLINE REFRIGERANT DRYER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Personnel Required
Direct Support
MOS 52C, Utilities Equipment Repairer
Tools and Special Tools
Equipment Conditions
Tool kit, general mechanic's, automotive (Item 90,
Hood opened (TM 5-3805-291-10)
Shop equipment, automotive maintenance and
Steering frame lock connected (TM 5-3805-291-
repair: field maintenance, basic, less power (Item
10)
Materials/Parts
Drawings Required
Oil, lubricating, refrigerant compressor: Synthetic
TM 5-3805-291-23P, Figure 175
Estimated Time to Complete Task
O-ring (2)
3.0 hr
REMOVAL
WARN I N G
When servicing this machine, performing maintenance, or disposing of materials such as engine cool-
ant, hydraulic fluid, lubricants, battery acids or batteries, and CARC paint, consult your unit/local
hazardous waste disposal center or safety office for local regulatory guidance. If further information is
needed, please contact The Army Environmental Hotline at 1-800-872-3845.
Take care to prevent refrigerant from touching your skin or eyes. Liquid refrigerant, when exposed to
air, quickly evaporates and will freeze skin or eye tissue. Use protective gloves and goggles. Serious
injury or blindness may result if you come in contact with liquid refrigerant.
Refrigerant R-134a air conditioning systems should not be pressure tested or leak tested with com-
pressed air. Combustible mixtures of air and R-134a may form, resulting in a fire or explosion, which
could cause injury or death to personnel.
DO NOT work in an area where refrigerant may contact an open flame or burning material such as a
cigarette. When refrigerant contacts extreme heat, refrigerant breaks down into poisonous phosgene
gas which, if breathed, causes severe respiratory irritation. DO NOT breathe fumes from an open
flame leak detector.