TM 5-3805-291-23-2
BUCKET LIFT ARMS REPLACEMENT - CONTINUED
0229 00
REMOVAL
1.
Raise lift arm (1) until front pin assembly (2) bores
and rear pin assembly (3) bores are level.
2.
Install Pin, shoulder, headless (Item 48, WP 0232 00),
Saddle assembly, lifting block (Item 65, WP 0232 00),
Stand assembly (Item 79, WP 0232 00), and Tubing
assembly set, nonmetallic (Item 93, WP 0232 00)
under lift arm (1).
427-C1166
3.
Attach lifting equipment to lift cylinder (4) on lift arm (1).
4.
Remove bolt (5), washer (6), and spacer (7) from pin assembly (2).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Lift cylinder weighs 550 lb (250 kg).
5.
With assistance, place blocking between lift cylinder
(4) and loader frame (8) and lower lift cylinder onto
blocking.
6.
Repeat steps 4 and 5 on opposite side of machine.
427-C1167
0229 00-2