TM 5-3805-292-23
0009
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
SERVICE
WARN I N G
Coolant
Service
DO NOT service cooling system unless engine has
cooled. This is a pressurized cooling system and
escaping steam or hot coolant will cause serious burns.
Wear effective eye, hand, and skin protection when
handling coolants.
Failure to follow these wanings may cause injury to
r
personnel.
24
1,200 Hours
1.0
Drain, flush, and fill cooling system
Auger
25
1,200 Hours
1.0
a. Remove drive from mounting
bracket (WP 0167).
b. Remove drain/fill plug and drain
lubricant from drain/fill opening.
c. Install drive on mounting bracket
d. Tilt drive down 15 degrees from
horizontal and support with wood
blocks. Add 80W or 90W lubricant
through drain/fill opening until
lubricant covers internal gear.
e. Place drive in horizontal position
and make sure lubricant is visible. If
lubricant is not visible, repeat
step d.
f. Install drain/fill plug.
Serpentine
Belt
26
1,500 Hours
1.5
Replace A/C belt (WP 0052).
END OF TASK
0009-20