TM 5-3805-292-23
0037
INSTALLATION
00037
WARN I N G
Use caution when using adhesives and seaants. Prolonged inhalation of vapors can
l
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances.
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting equipment used is in good condition
and of suitable load capacity.
Failure to follow these warnings ma result in injury to personnel.
y
1. Install access cover (Figure 5, Item 4) and two bolts (Figure 5, Item 5) on flywheel housing (Figure 5, Item 1).
2. Install mounting plate (Figure 5, Item 2) and two bolts (Figure 5, Item 3) on flywheel housing (Figure 5, Item 1).
3. Apply sealing compound to rear of flywheel housing (Figure 5, Item 1).
Figure 5. Flywheel Housing.
0037
