TM 5-3805-292-23
0051
REMOVAL
00051
N OT E
Tag all wires and wiring harnesses to aid in installation.
1. Remove nut (Figure 1, Item 2), lockwasher (Figure 1, Item 3), and wire (Figure 1, Item 1) from coolant temper-
ature sender (Figure 1, Item 4). Discard lockwasher.
2. Remove coolant temperature sender (Figure 1, Item 4) from thermostat housing (Figure 1, Item 5).
Figure 1. Coolant Temperature Sender.
0051
END OF TASK
CLEANING AND INSPECTION
00051
1. Remove all gasket material from mating surfaces.
WARN I N G
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and
low toxic material. However, it may be irritating to the eyes and skin. Use protective gloves
and goggles. Use in well-ventilated areas. Keep away from open flames and other
sources of ignition. Failure follow this warning may result in injury or death to personnel.
2. Clean all parts (except rubber and plastic surfaces) and mating surfaces with solvent cleaning compound.
