TM 5-3805-292-23
0132
REMOVAL
000132
1. Remove three bolts (Figure 1, Item 4), washers (Figure 1, Item 3), and locknuts (Figure 1, Item 2) from exhaust
pipe (Figure 1, Item 5). Discard locknuts.
2. Remove exhaust pipe (Figure 1, Item 5) from engine compartment hood (Figure 1, Item 1).
Figure 1. Exhaust Pipe.
0132
END OF TASK
CLEANING AND INSPECTION
000132
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK
INSTALLATION
000132
1. Install exhaust pipe (Figure 1, Item 5) on engine compartment hood (Figure 1, Item 1).
2. Install three bolts (Figure 1, Item 4), washers (Figure 1, Item 3), and new locknuts (Figure 1, Item 2) on exhaust
pipe (Figure 1, Item 5).
END OF TASK