TM 5-3805-292-23
0131
INSTALLATION CONTINUED
5. With assistance, position engine compartment hood (Figure 3, Item 1) on machine.
6. Slide rod (Figure 3, Item 10), two spacer sleeves (Figure 3, Item 13), and washers (Figure 3, Item 14) onto
engine compartment hood (Figure 3, Item 1) through holes in frame.
7. Install two retaining rings (Figure 3, Item 15) on rod (Figure 3, Item 10).
8. Install support lift (Figure 3, Item 12) on engine compartment hood (Figure 3, Item 1).
9. Install clip (Figure 3, Item 11) on support lift (Figure 3, Item 12).
10. Install A/C condenser (Figure 3, Item 3) (WP 0091).
11. Install exhaust pipe (Figure 3, Item 2) (WP 0132).
12. Install two clamps (Figure 3, Item 4), spacer (Figure 3, Item 7), washer (Figure 3, Item 6), nut (Figure 3, Item
8), and nut (Figure 3, Item 9) on engine compartment hood (Figure 3, Item 1).
Figure 3. Engine Compartment Assembly.
0131
END OF TASK