TM 5-3805-298-23-1
0018
Table 1. E0236 Return Hydraulic Oil Filter Plugged Event Code - Continued.
018
EID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
E0236 Return Hydraulic Oil
Filter Plugged Event Code -
Continued
Figure 1. Hydraulic Filter Bypass Switch.
0018
Test Step 4. Test Hydraulic Oil Filter
Bypass Switch Signal Circuit for a
Short to Ground in Rear Frame
Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Remove right lower cab access
panels (WP 0347).
3. Disconnect connector M-C1
(WP 0012, Figure 57) from
connector C-C20 (WP 0012,
Figure 56).
4. Using digital multimeter
Continuity - Replace rear frame wiring
(WP 0174), test for continuity
harness (WP 0295).
between connector M-C1
Proceed to Test Step 6.
(WP 0012, Figure 57) terminal 6
No Continuity - Proceed to Test Step 5.
and ground.