TM 5-3805-298-23-1
0020
Table 1. E0329 Transmission Filter Plugged Event Code - Continued.
020
EID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
4. Using digital multimeter
Continuity - Replace transmission
E0329 Transmission Filter
(WP 0174), test for continuity
wiring harness (WP 0298).
Plugged Event Code -
between connector P-C1
Continued
Proceed to Test Step 6.
(WP 0012, Figure 53) terminal 18
No Continuity - Proceed to Test Step 5.
and ground.
Test Step 5. Test Lower Cab Wiring
Harness for Short to Ground.
1. Remove left lower cab access
panels (WP 0347).
2. Remove transmission ECM cover
(WP 0266).
3. Disconnect transmission wiring
harness connector C-C12
(WP 0012, Figure 26) from
transmission ECM J1.
4. Using digital multimeter
Continuity - Replace lower cab wiring
(WP 0174), test for continuity
harness (WP 0291).
between lower cab wiring harness
Proceed to Test Step 6.
connector C-C15 (WP 0012,
No Continuity - Replace transmission
Figure 52) terminal 18 and ground.
ECM (WP 0266).
Proceed to Test Step 6.
Test Step 6. Verify Symptom Is
Resolved.
1. Ensure all wiring harness
connectors are connected.
2. Install right and left lower cab
access panels (WP 0347).
3. Start and idle engine until normal
operating temperature
(transmission fluid 129F) is
reached (TM 5-3805-298-10).
4. Using MSD (WP 0008), verify
Event Code E0329 Is Active - Repeat
event code E0329 is not active.
troubleshooting from the beginning.
Event Code E0329 Not Active -
Troubleshooting complete.
END OF WORK PACKAGE
0020-6
