TM 5-3805-298-23-1
0021
Table 1. E0360 Low Engine Oil Pressure Event Code - Continued.
021
EID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
CAUTION
E0360 Low Engine Oil
Pressure Event Code -
Do not continue to operate the engine with low oil pressure. If measured
Continued
oil pressure is low, discontinue engine operation until the problem is
corrected.
Failure to follow this caution will cause engine damage.
NOTE
The warning will be cancelled if the oil pressure rises 3 psi (21 kPa)
above the minimum oil pressure setpoint for 20 seconds.
5. Using MSD (WP 0008), check for
E0360 Is Not Active - Proceed to Test
active event code E0360.
Step 3.
E0360 Is Active - Proceed to step 6.
6. Test the actual engine oil
Engine Oil Pressure Less Than
pressure; refer to Engine Oil
37 psi (255 kPa) at Any Time -
Pressure Test (WP 0162). Monitor
Replace engine oil pump (WP 0190),
and record pressure reading on
then proceed to step 8.
gauge with engine at idle and at
Engine Oil Pressure Greater Than
full throttle (TM 5-3805-298-10).
85 psi (586 kPa) at Any Time -
Replace engine oil pump (WP 0190).
Proceed to Test Step 3.
Engine Oil Pressure Less Than 45 psi
(310 kPa) During Full Throttle -
Replace engine oil pump (WP 0190),
then proceed to step 7.
7. Test the actual engine oil
Engine Oil Pressure Less Than
pressure; refer to Engine Oil
37 psi (255 kPa) at Any Time -
Pressure Test (WP 0162). Monitor
Replace engine (WP 0178).
and record pressure reading on
Proceed to Test Step 3.
gauge with engine at idle and at
Engine Oil Pressure Less Than
full throttle (TM 5-3805-298-10).
45 psi (310 kPa) During Full Throttle
- Replace engine (WP 0178).
Proceed to Test Step 3.
0021-4
