TM 5-3805-298-23-1
0035
Table 1. Engine Cranks But Does Not Run - Continued.
035
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
14. Disconnect connector EN-C1
Engine Cranks But Does Not
(WP 0012, Figure 11) from engine
Run - Continued
ECM J1 (WP 0265).
15. Using a digital multimeter, test for
Continuity - Replace engine control
wiring harness (WP 0309).
continuity between connector EN-
C20 terminal 2 and machine
Connect all wiring harness connectors,
ground.
Proceed to Test Step 12.
No Continuity - Proceed to step 16.
16. Using a digital multimeter, test for
Continuity - Replace engine control
continuity between connector EN-
wiring harness (WP 0309).
C20 terminal 1 and terminal 2.
Connect all wiring harness connectors.
Proceed to Test Step 12.
No Continuity - Replace engine ECM
(WP 0265).
Connect all wiring harness connectors.
Proceed to Test Step 12.
Test Step 12. Verify Symptom Is
Resolved.
1. Install right engine access panel
(WP 0348).
2. Attempt to start the engine
Engine Starts and Runs -
(TM 5-3805-298-10).
Troubleshooting complete.
Engine Cranks But Does Not Run -
Repeat troubleshooting from the
beginning.
END OF WORK PACKAGE
0035-34