TM 5-3805-298-23-1
0071
Table 1. Transmission Does Not Operate in Any Gear - Continued.
071
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 9. Test Transmission Oil
Transmission Does Not
Pump Pressure.
Operate in Any Gear -
1. Connect transmission pump
Continued
pressure test gauge assembly
(Figure 3, Item 2) to connector on
transmission relief valve (Figure 3,
Item 1).
Figure 3. Transmission Pump Pressure Connection.
0071
2. Turn battery disconnect switch ON
and start engine (TM 5-3805-298-
10).
3. Raise the work tool above the
ground (TM 5-3805-298-10).
4. Turn transmission neutralizer
switch to ON (TM 5-3805-298-10).
5. Warm the transmission oil to
normal operating temperature of
approximately 165F to 185F
(75C to 85C).
6. Warm the hydraulic oil to operating
temperature of 140F (60C)
(TM 5-3805-298-10).
7. Apply service brake and release
parking brake (TM 5-3805-298-
10).
8. Turn the transmission control to
third speed forward (TM 5-3805-
298-10).
9. Increase engine to high speed idle
(2,450 rpm).