TM 5-3805-298-23-1
0071
Table 1. Transmission Does Not Operate in Any Gear - Continued.
071
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. Remove rear drive shaft
Transmission Does Not
(WP 0318).
Operate in Any Gear -
Continued
4. Inspect rear drive shaft for damage
Rear Drive Shaft Is OK - Proceed to
(WP 0318).
step 5.
Rear Drive Shaft Is Damaged -
Replace rear drive shaft (WP 0318).
Proceed to Test Step 10.
5. Start engine (TM 5-3805-298-10).
6. Raise the work tool above the
ground (TM 5-3805-298-10).
7. Turn transmission neutralizer
switch to ON (TM 5-3805-298-10).
8. Warm the transmission oil to
normal operating temperature of
approximately 165F to 185F
(75C to 85C).
9. Warm the hydraulic oil to operating
temperature of 140F (60C)
(TM 5-3805-298-10).
10. Apply service brake and release
parking brake (TM 5-3805-298-
10).
11. Turn the transmission control to
first speed forward (TM 5-3805-
298-10).
12. With assistance, check that the
Output of Transmission Is Turning -
output of the final drive on the
Proceed to Test Step 8.
transmission is turning.
Output of Transmission Is Not
Turning - Replace transmission
(WP 0306).
Proceed to Test Step 10.
0071-8
