TM 5-3805-298-23-1
0081
Table 1. 96 Fuel Level Sensor Diagnostic Codes - Continued.
081
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 4. Test for Open Rear
96-5 Fuel Level Sensor
Frame Wiring Harness.
Current Is Below Normal -
1. Remove right lower cab access
Continued
panels (WP 0347).
2. Disconnect connector M-C1
(WP 0012, Figure 57) from
connector C-C20 (WP 0012,
Figure 56).
3. Using digital multimeter
Resistance 5.0 Ohms or Less -
(WP 0174), measure resistance
Replace lower cab wiring harness
between connector M-C1
(WP 0291).
(WP 0012, Figure 57) terminal 14
Proceed to Test Step 5.
and terminal 23.
Resistance Greater Than 5.0 Ohms -
Replace rear frame wiring harness
(WP 0295).
Proceed to Test Step 5.
Test Step 5. Verify Malfunction Is
Resolved.
1. Ensure all wiring harness
connectors are connected.
2. Install oil cooler cover (WP 0340).
3. Install right lower cab access
panels (WP 0347).
4. Install transmission ECM cover
(WP 0266).
5. Install left lower cab access panels
(WP 0347).
6. At MSD, check for active
Diagnostic Code 96-5 Fuel Level
Transmission 924H diagnostic
Sensor Current Is Below Normal
codes (WP 0008).
Becomes Inactive - Troubleshooting
complete.
Diagnostic Code 96-5 Fuel Level
Sensor Current Is Below Normal
Remains Active - Repeat
troubleshooting from the beginning.
END OF WORK PACKAGE
0081-9/(10 blank)