TM 5-3805-298-23-1
0092
Table 1. 444 Start Relay Diagnostic Codes - Continued.
092
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
6. Using MSD, check for active
444-6 Start Relay Current
Diagnostic Code 444-5 Start Relay
diagnostic codes (WP 0008).
Above Normal - Continued
Current Below Normal Becomes
Active - Replace starter relay
(WP 0262).
Proceed to Test Step 5.
Diagnostic Code 444-6 Start Relay
Current Above Normal Remains
Active - Proceed to Test Step 3.
Test Step 3. Test for Shorted Engine
Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Remove right lower cab access
panels (WP 0347).
3. Disconnect connector EN-C2
(WP 0012, Figure 12) from
connector C-C18 (WP 0012,
Figure 13).
4. Using digital multimeter
Continuity - Replace engine wiring
(WP 0174), test for continuity
harness (WP 0299).
between connector EN-C2
Proceed to Test Step 5.
(WP 0012, Figure 12) terminal 5
No Continuity - Proceed to step 5.
and terminal 2.
5. Using digital multimeter
Continuity - Replace engine wiring
(WP 0174), test for continuity
harness (WP 0299).
between connector EN-C2
Proceed to Test Step 5.
(WP 0012, Figure 12) terminal 5
No Continuity - Proceed to Test Step 4.
and ground.
0092-8