TM 5-3805-298-23-1
0097
Table 1. 600 Hydraulic Oil Temperature Sensor Diagnostic Codes - Continued.
097
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
4. Using digital multimeter
600-5 Hydraulic Oil
Resistance 5.0 Ohms or Less -
(WP 0174), measure resistance
Temperature Sensor Current
Replace lower cab wiring harness
between connector EN-C8
Is Below Normal - Continued
(WP 0291).
(WP 0012, Figure 22) terminal 2
Proceed to Test Step 5.
and connector EN-C2 (WP 0012,
Resistance Greater Than 5.0 Ohms -
Figure 12) terminal 17.
Replace engine wiring harness
(WP 0299).
Proceed to Test Step 5.
Test Step 5. Verify Malfunction Is
Resolved.
1. Ensure all wiring harness
connectors are connected.
2. Install left engine access panel
(WP 0350).
3. Install transmission ECM cover
(WP 0266).
4. Install left and right lower cab
access panels (WP 0347).
5. Using MSD, check for active
Diagnostic Code 600-5 Hydraulic Oil
diagnostic codes (WP 0008).
Temperature Sensor Current Is
Below Normal Becomes Inactive -
Troubleshooting complete.
Diagnostic Code 600-5 Hydraulic Oil
Temperature Sensor Current Is
Below Normal Remains Active -
Repeat troubleshooting from the
beginning.
END OF WORK PACKAGE
0097-11/(12 blank)