TM 5-3805-298-23-1
0097
Table 1. 600 Hydraulic Oil Temperature Sensor Diagnostic Codes - Continued.
097
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
4. Using digital multimeter
Continuity - Replace lower cab wiring
600-4 Hydraulic Oil
(WP 0174), test for continuity
harness (WP 0291).
Temperature Sensor Voltage
between connector C-C12
Is Below Normal or Shorted
Proceed to Test Step 5.
(WP 0012, Figure 26) terminal 30
Low - Continued
No Continuity - Proceed to step 5.
and terminal 23.
5. Using digital multimeter
Continuity - Replace lower cab wiring
(WP 0174), test for continuity
harness (WP 0291).
between connector C-C12
Proceed to Test Step 5.
(WP 0012, Figure 26) terminal 30
No Continuity - Replace transmission
and ground.
ECM (WP 0266).
Proceed to Test Step 5.
Test Step 5. Verify Malfunction Is
Resolved.
1. Ensure all wiring harness
connectors are connected.
2. Install left engine access panel
(WP 0350).
3. Install transmission ECM cover
(WP 0266).
4. Install left and right lower cab
access panels (WP 0347).
5. Using MSD, check for active
Diagnostic Code 600-4 Hydraulic Oil
diagnostic codes (WP 0008).
Temperature Sensor Voltage Is
Below Normal Becomes Inactive -
Troubleshooting complete.
Diagnostic Code 600-4 Hydraulic Oil
Temperature Sensor Voltage Is
Below Normal Remains Active -
Repeat troubleshooting from the
beginning.
0097-8