TM 5-3805-298-23-1
0111
Table 1. 1402 Solenoid Valve 2 (Forward High) Diagnostic Codes - Continued.
0111
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
5. Using digital multimeter
1402-6 Solenoid Valve 2
Continuity Replace lower cab wiring
(WP 0174), test for continuity
(Forward High) Current
harness (WP 0291).
between connector C-C12
Above Normal - Continued
Proceed to Test Step 5.
(WP 0012, Figure 26) terminal 62
No Continuity Replace transmission
and ground.
ECM (WP 0266).
Proceed to Test Step 5.
Test Step 5. Verify Malfunction Is
Resolved.
1. Ensure all wiring harness
connectors are connected.
2. Install transmission ECM cover
(WP 0266).
3. Install left and right lower cab
access panels (WP 0347).
4. Install right engine access panel
(WP 0348).
5. Apply and hold service brake, start
Diagnostic Code 1402-6 Solenoid
engine, and shift transmission into
Valve 2 (Forward High) Current
fourth gear forward
Above Normal Becomes Inactive
(TM 5-3805-298-10). Using MSD,
Troubleshooting complete.
check for active diagnostic codes
Diagnostic Code 1402-6 Solenoid
Valve 2 (Forward High) Current
Above Normal Remains Active
Repeat troubleshooting from the
beginning.
END OF WORK PACKAGE
0111-9/(10 blank)
