TM 5-3805-298-23-1
0117
Table 1. Heater Does Not Blow Warm Air When Temperature Control Panel Is Set on Maximum Heat -
Continued.
0117
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Heater Does Not Blow Warm
Test Step 6. Verify Malfunction Is
Air When Temperature
Resolved.
1. Start and idle engine until normal
Control Panel Is Set on
operating temperature is reached
Maximum Heat Continued
(TM 5-3805-298-10).
2. Install right engine access panel
(WP 0348).
3. Install seat assembly and pedes-
tal (WP 0355).
4. Turn heater A/C switch to heater
on (TM 5-3805-298-10).
5. Turn heater control knob to
maximum heat (TM 5-3805-298-
10).
6. Turn blower switch to III
Heater Operates Normally
(TM 5-3805-298-10) and test
Troubleshooting complete.
output of heater.
No Heat Output from Heater Repeat
troubleshooting from the beginning.
END OF WORK PACKAGE
0117-7/(8 blank)