TM 5-3805-298-23-1
0125
Table 1. Front Left Turn Signal Does Not Operate - Continued.
0125
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. Disconnect connector C-TSS
Front Left Turn Signal Does
(WP 0012, Figure 155) from turn
Not Operate - Continued
signal switch (WP 0012,
Figure 156).
NOTE
Make sure turn signal switch is in left turn position (TM 5-3805-298-10).
4. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0174), measure resistance
Replace lower cab wiring harness
between turn signal switch
(WP 0291).
(WP 0012, Figure 156) terminal 1
Proceed to Test Step 5.
and terminal 3.
Resistance Greater Than 5.0 Ohms
Replace turn signal switch (WP 0253).
Proceed to Test Step 5.
Test Step 5. Verify Malfunction Is
Resolved.
1. Ensure all harness connectors are
connected.
2. Install instrument cluster
(WP 0252).
3. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-298-10).
4. Turn the military light switch to Ser.
Drive position and lower switch to
OFF (TM 5-3805-298-10).
5. Turn the turn signal switch to left
turn signal position (TM 5-3805-
298-10).
6. Observe operation of front left turn
Front Left Turn Signal Operates
signal (TM 5-3805-298-10).
Troubleshooting complete.
Front Left Turn Signal Does Not
Operate Repeat troubleshooting
from the beginning.
END OF WORK PACKAGE
0125-4