TM 5-3805-298-23-2
0153
Table 1. Ride Control Does Not Operate - Continued.
0153
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Resistance 5.0 Ohms or Less Install
Ride Control Does Not
3. Using digital multimeter
ride control fuse (TM 5-3805-298-10)
Operate - Continued
(WP 0174), measure resistance
and proceed to Test Step 6.
between terminals of ride control
fuse.
Resistance Greater Than 5.0 Ohms
Replace ride control fuse (WP 0012,
Figure 44, Item 8) and proceed to Test
Step 13.
Test Step 6. Test for Faulty Ride
Control Relay.
1. Swap ride control relay with
secondary steering relay
(TM 5-3805-298-10).
2. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-298-10).
3. Perform Ride Control Solenoid
Override (WP 0166).
4. Using digital multimeter
Voltage 18 to 28 V Swap ride control
(WP 0174), test for voltage
relay back to secondary steering relay
between connector PE-C4
position and replace ride control relay
(WP 0012, Figure 217) terminal 1
(TM 5-3805-298-10).
and terminal 2 (ground).
Proceed to Test Step 21.
Voltage Less Than 18 V Proceed to
Test Step 7.
Test Step 7. Test for Voltage at Ride
Control Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Disconnect connector LE-C11
(WP 0012, Figure 221) from
connector PE-C2 (WP 0012,
Figure 222).
3. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-298-10).
4. Perform Ride Control Solenoid
Override (WP 0166).
5. Using digital multimeter
Voltage 18 to 28 V Proceed to step 6.
(WP 0174), test for voltage
Voltage Less Than 18 V Proceed to
between connector LE-C11
Test Step 8.
(WP 0012, Figure 221) terminal A
and terminal B (ground).
0153-4