TM 5-3805-298-23-2
0155
Table 1. Kickout System Will Not Operate or Operates Improperly Continued.
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
9. If removed, slide shaft (Figure 36,
Kickout System Will Not
Item 5) into channel (Figure 36,
Operate or Operates
Improperly - Continued
Item 4).
10. If removed, position mounting
bracket (Figure 36, Item 1) on two
cylinder mounts (Figure 36, Item 9)
and install four washers
(Figure 36, Item 2) and bolts
(Figure 36, Item 3).
11. If loosened, do not tighten four
bolts (Figure 36, Item 10) at this
time.
12. If removed, install bolt (Figure 36,
Item 6) on support (Figure 36,
Item 8) and tighten jam nut
(Figure 36, Item 7).
Figure 36. Shaft and Fork and Bucket Kickout Position Sensors Mounting Hardware.
0155
