TM 5-3805-298-23-2
0155
Table 1. Kickout System Will Not Operate or Operates Improperly Continued.
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 58. Test Kickout Positioner
Kickout System Will Not
Wiring Harness for High Resistance
Operate or Operates
or Open.
Improperly - Continued
Using digital multimeter (WP 0174),
Resistance 5.0 Ohms or Less
measure resistance between
Replace fork kickout position sensor
connector N-C1 terminal 5 (WP 0012,
(WP 0297).
Figure 238) and connector N-C3
Proceed to Test Step 60.
terminal B (WP 0012, Figure 234).
Resistance Greater Than 5.0 Ohms
Replace kickout positioner wiring
harness (WP 0297).
Proceed to Test Step 60.
Test Step 59. Test Lower Cab Wiring
Harness for High Resistance or
Open.
1. Remove console instrument panel
for access to wiring harness
connectors (WP 0264).
2. Disconnect connector C-C38
(WP 0012, Figure 239) from
bucket/fork switch (WP 0012,
Figure 240).
3. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0174), measure resistance
Proceed to step 4.
between connector C-C10
Resistance Greater Than 5.0 Ohms
terminal 1 (WP 0012, Figure 86)
Replace lower cab wiring harness
and connector C-C38 terminal 3
(WP 0291).
(WP 0012, Figure 239).
Proceed to Test Step 60.
4. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0174), measure resistance
Proceed to step 5.
between connector C-C10
Resistance Greater Than 5.0 Ohms
terminal 2 (WP 0012, Figure 86)
Replace lower cab wiring harness
and connector C-C38 terminal 1
(WP 0291).
(WP 0012, Figure 239).
Proceed to Test Step 60.
5. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0174), measure resistance
Replace bucket/fork switch (WP 0264).
between connector C-C22 terminal
Proceed to Test Step 60.
3 (WP 0012, Figure 232) and
Resistance Greater Than 5.0 Ohms
connector C-C38 terminal 2
Replace lower cab wiring harness (WP
(WP 0012, Figure 239).
0291).
Proceed to Test Step 60.
0155-59