TM 5-3805-298-23-2
0163
FUEL SYSTEM VERIFICATION TEST CONTINUED
4. Start and run machine (TM 5-3805-298-10).
5. Read the Set up test conditions (Figure 3, Item 1) on the ET screen, and operate machine until test conditions
are met.
6. Select the Next button (Figure 3, Item 2) to begin the test.
Figure 3. Set Up Test Conditions.
0163
WARNING
The Fuel System Verification Test is an automated test, as ET prepares to perform the test
"Please Wait" (Figure 4, Item 1) will be displayed. Each injector that has not been tested
ET will display "Pending" (Figure 4, Item 5) in the Test Results column (Figure 4, Item 2).
"Testing" (Figure 4, Item 4) will be displayed during the injector test. After each injector is
tested "Success" (Figure 4, Item 3) or "Fail" will be displayed in the Test Results Column
(Figure 4, Item 2).