TM 5-3805-298-23-2
0167
TRANSMISSION FILL CALIBRATION CONTINUED
NOTE
The Transmission Fill Calibration procedure is an automated process, the calibration
screen displays instructions for calibration, follow all on screen prompts.
The top display area provides all required parameters to perform calibration procedure.
The middle display area provides information about the status of the calibration.
The bottom display area provides conditions to be met for the calibration procedure.
7. Read the Set Up Calibration Conditions (Figure 4, Item 1) on the ET screen, and operate machine until test
conditions are met.
8. Select the Next button (Figure 4, Item 2) to begin the test.
Figure 4. Set Up Test Conditions.
0167