TM 5-3805-298-23-2
0167
TRANSMISSION FILL CALIBRATION CONTINUED
1. Connect MSD (WP 0008) and select Transmission 924H.
2. Set the parking brake (TM 5-3805-298-10).
3. Select Status icon (Figure 1, Item 1), Transmission - Basic parameter list (Figure 1, Item 3), monitor and record
Transmission Oil Temperature parameter (Figure 1, Item 2).
4. Start and run the engine (TM 5-3805-298-10). Perform the following steps until Transmission Oil Temperature
parameter (Figure 1, Item 2) reaches at least 181F (82.7C):
a. Place autoshift switch in manual (bottom) position (TM 5-3805-298-10).
b. Turn transmission neutralizer switch off (bottom) (TM 5-3805-298-10).
c.
Place transmission control lever to third gear position (TM 5-3805-298-10).
d. Press service brakes (TM 5-3805-298-10).
e. Put transmission control lever in forward position (TM 5-3805-298-10).
f.
Operate engine at high idle (2,200 rpm).
g. After reaching 181F (82.7C), place transmission control lever in neutral.
Figure 1. Transmission - Basic Status Parameter List.
0167