TM 5-3805-298-23-2
0174
DISCONNECTING AND CONNECTING WIRING HARNESS CONNECTORS
000174
This procedure describes how to disconnect and connect the various wiring harness connectors found on the 924H
Loader.
CAUTION
When disconnecting connector, never pull on wires. Always pull on the connector body
when disconnecting connector.
Failure to follow this caution may result in damage to equipment.
Single Press Tab Connector
000174
1. To disconnect connector, press and hold tab (Figure 1, Item 1) while pulling connector body.
2. To connect connector, push connector ends together until tab (Figure 1, Item 1) clicks and connector body
cannot be pulled apart.
Figure 1. Single Press Tab Connector.
0174
