TM 5-3805-298-23-2
0174
DISCONNECTING AND CONNECTING WIRING HARNESS CONNECTORS CONTINUED
000174
Connector With Locking Clip
000174
1. To disconnect connector, slide locking clip (Figure 3, Item 1) until it is even with edge of connector
(Figure 3, Item 2).
2. Press and hold tab (Figure 3, Item 3) while pulling on connector body.
3. To connect connector, push connector ends together until tab clicks (Figure 3, Item 3).
4. Slide locking clip (Figure 3, Item 1) into place so that tab (Figure 3, Item 3) cannot be depressed.
Figure 3. Connector With Locking Clip.
0174
