TM 5-3805-298-23-2
0177
INSTALLATION CONTINUED
CAUTION
Remove all caps from hydraulic openings and component connections during installation.
Failure to follow this caution may result in damage to equipment.
NOTE
Install hoses and tubes as noted during removal.
91. Install new O-ring (Figure 107, Item 12), hose (Figure 107, Item 11), split flanges (Figure 107, Item 13), four
washers (Figure 107, Item 15) and bolts (Figure 107, Item 14) on implement pump (Figure 107, Item 16).
92. Install new O-ring (Figure 107, Item 4), hose (Figure 107, Item 6) and tighten tube nut (Figure 107, Item 5) on
steering pump (Figure 107, Item 3).
93. Install new O-ring (Figure 107, Item 9), hose (Figure 107, Item 7) and tighten tube nut (Figure 107, Item 8) on
steering pump (Figure 107, Item 3).
94. Install new O-ring (Figure 107, Item 1), hose (Figure 107, Item 10) and tighten tube nut (Figure 107, Item 2) on
implement pump (Figure 107, Item 16).
Figure 107. Implement and Steering Pump Hoses.
0177
