TM 5-3805-298-23-2
0178
INSTALL ENGINE ON STAND CONTINUED
10. Remove two bolts (Figure 7, Item 1), washers (Figure 7, Item 12) and exhaust elbow (Figure 7, Item 2) from
engine.
CAUTION
Cap all openings along with component connections during removal to protect against
contamination. Failure to follow this caution may result in damage to equipment.
11. Remove two bolts (Figure 7, Item 8), gasket (Figure 7, Item 7) and oil return tube (Figure 7, Item 6) from
engine. Discard gasket. Position oil return tube aside.
12. Remove bolt (Figure 7, Item 10), O-ring (Figure 7, item 11) and oil supply line (Figure 7, Item 9) from engine.
Discard O-ring. Position oil supply line aside.
13. Loosen clamp (Figure 7, Item 4) and remove hose (Figure 7, Item 5) from turbocharger (Figure 7, Item 3).
Figure 7. Exhaust Manifold.
0178