TM 5-3805-298-23-4
0358
FRONT WIPER ARM REMOVAL
000358
NOTE
It is not necessary to remove front wiper blade from front wiper arm, unless front wiper
blade is damaged.
1. Disconnect washer hose (Figure 2, Item 6) from connector (Figure 2, Item 5).
CAUTION
Use care when loosening bolts. Nuts in wiper arm are not captive. If bolts are loosened too
much, nuts may fall into hull or be lost.
NOTE
Mark location of wiper arm on shaft to aid installation.
2. Loosen four bolts (Figure 2, Item 2) and two clamps (Figure 2, Item 3) from two front wiper motor shafts
(Figure 2, Item 4).
3. Remove front wiper arm (Figure 2, Item 1) from two front wiper motor shafts (Figure 2, Item 4).
Figure 2. Front Wiper Arm.
0358
END OF TASK