TM 5-3805-298-23-4
0381
REMOVAL
000381
WARNING
DO NOT disconnect or remove any hydraulic system hoses, tubes, or fittings unless
engine is shut down and hydraulic system pressure has been relieved. Tighten all
connections before applying pressure. Escaping hydraulic fluid under pressure can
penetrate skin.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before removing
any hydraulic fitting.
Wear protective eye covering and gloves.
The accumulator is filled with dry nitrogen. Do not loosen or remove valve or cap from
accumulator.
Failure to follow these warnings may result in injury or death to personnel.
NOTE
Tag and mark hose to aid installation.
Cap and plug open hose end and port to avoid contamination.
0381-2