TM 5-3805-298-23-4
0381
REMOVAL CONTINUED
3. While supporting pilot oil accumulator (Figure 2, Item 1), remove two bolts (Figure 2, Item 4), washers
(Figure 2, Item 3), and two clips (Figure 2, Item 2) from bracket (Figure 2, Item 5).
4. Remove pilot oil accumulator (Figure 2, Item 1) from machine.
Figure 2. Hydraulic System Accumulator.
0381
END OF TASK
CLEANING AND INSPECTION
000381
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK
INSTALLATION
000381
NOTE
Replacement pilot oil accumulators are not charged.
1. If replacing pilot oil accumulator (Figure 2, Item 1), charge with dry nitrogen (see procedures in this work
package) prior to installation.
2. Position pilot oil accumulator (Figure 2, Item 1) on machine.
3. Install pilot oil accumulator (Figure 2, Item 1), two clips (Figure 2, Item 2), two washers (Figure 2, Item 3), and
bolts (Figure 2, Item 4) on bracket (Figure 2, Item 5).
