TM 5-3805-298-23-4
0384
INSTALLATION CONTINUED
NOTE
Remove caps or plugs and install hose as noted during removal.
Use container to catch any fluid that may drain from hydraulic system. Dispose of fluid IAW
local policy and ordinances. Ensure all spills are cleaned up.
9. Position drain pan to catch fluid that drains from hose (Figure 13, Item 6) or cylinder (Figure 13, Item 1).
10. Install new O-ring (Figure 13, Item 2), hose (Figure 13, Item 6), and tube nut (Figure 13, Item 3) on bucket lift
cylinder (Figure 13, Item 1).
11. Install hose retainer (Figure 13, Item 4) and clamp (Figure 13, Item 5) on cylinder (Figure 13, Item 1). Tighten
clamp.
Figure 13. Tube Nut, Hose, and O-ring at Bucket Lift Cylinder.
0384
