TM 5-3805-298-23-4
0401
REMOVAL CONTINUED
NOTE
Tag and mark electrical terminals and note wiring harness routing to aid installation.
2. Disconnect four lower cab harness terminals (Figure 2, Item 4) from arctic heater switch (Figure 2, Item 1).
3. Remove nut (Figure 2, Item 2) and arctic heater switch (Figure 2, Item 1) from plate (Figure 2, Item 3).
Figure 2. Arctic Heater Switch.
0401
END OF TASK
CLEANING AND INSPECTION
000401
Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0174).
END OF TASK
INSTALLATION
000401
NOTE
Install electrical terminals and wiring harness as noted during removal.
1. Install arctic heater switch (Figure 2, Item 1) and nut (Figure 2, Item 2) on plate (Figure 2, Item 3).
2. Connect four terminals (Figure 2, Item 4) to arctic heater switch (Figure 2, Item 1).
