TM 5-2420-231-10
0023
SERVICING PROCEDURES - Continued
Removal From 30 Day Storage
NOTE
1. Remove duct tape from exhaust pipe opening.
2. Perform PMCS procedures.
3. Clean windshield.
4. Prime turbocharger (WP 0010).
5. Start engine.
6. Allow BHL to run at 1,000 rpm 2 3 minutes while monitoring all warning lights and gages.
7. Raise FEL and rotate bucket to transport position. Check for correct operation of the FEL and all FEL
controls (WP 0011).
8. Remove backhoe from transport position and check for correct operation of the backhoe and all backhoe
controls (WP 0012).
9. Release parking brake and slowly operate the BHL, checking that all controls function correctly.
0023-25