TM 5-2420-231-10
OPERATOR LEVEL
CLEANING
INITIAL SETUP:
Tools and Special Tools
References
None
None
Materials/Parts
Equipment Condition
Detergent (WP 0029, Item 8)
Engine shut off (WP 0010)
Wiping rag (WP 0029, Item 27)
Personnel Required
One
CLEANING PROCEDURES
Operator cleaning procedures must be performed on a regular basis. Dirt and foreign material are a constant
threat to satisfactory operation and maintenance.
1. Keep hands free of any accumulation of grease which can collect dust, dirt, and grit.
CAUTION
Do not wash the Backhoe Loader (BHL) or rubber or electrical components with cleaning
compounds, mineral spirits, or high-pressure washing apparatus. Failure to comply may
result in serious damage to decals or materials.
Do not wash glass areas or upper areas of cab with high-pressure water. Failure to comply
may result in serious damage to glass or cab air filter system.
2. Clean inner and outer surfaces of the BHL with water and detergent and allow to air dry.
3. Remove grease and accumulated deposits with wiping rag.
WARNING
Eye protection is required when working with compressed air. Compressed air can propel
particles at high velocity and injure eyes. Do not exceed 15 psi (103 kPa) when using
compressed air. Failure to comply may result in serious injury or death to personnel.
4. Clean debris from outside of radiator, oil cooler (located behind radiator), or air-conditioning condenser
(located forward of radiator) with low pressure air. For most effective cleaning, direct airstream forward
from inside engine compartment.
END OF WORK PACKAGE
0024-1/2 blank
