TM 5-2420-231-23-1
0010
Table 1. Engine Cranks but Does Not Run - Continued.
010
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5. Remove instrument panel front
Engine Cranks but Does Not
covers (WP 0174) and disconnect
Run - Continued
front console wiring harness con-
nector (Figure 7, Item 2) from
engine stop switch (Figure 7,
Item 1).
Figure 7. Engine Stop Switch.
0010
6. Turn ignition switch to the on posi-
tion (TM 5-2420-231-10).
7. Using a digital multimeter, mea-
Voltage 10 to 14 Volts - Proceed to
sure voltage between front console
step 8.
wiring harness connector terminal
Voltage Less Than 10 Volts - Replace
2 (WP 0007, Figure 1) and
front console wiring harness (WP
machine ground. Voltage should
0162).
be 10 to 14 volts.
Proceed to Test Step 8.
8. Turn ignition switch to the off posi-
tion (TM 5-2420-231-10).
