TM 5-2420-231-23-1
0010
Table 1. Engine Cranks but Does Not Run - Continued.
010
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Engine Cranks but Does Not
Test Step 7. Test Fuel Shutoff
Run - Continued
Solenoid Voltage Circuit for a Short.
1. Disconnect main chassis wiring
harness connector (Figure 8,
Item 1) from fuel shutoff solenoid
(Figure 8, Item 2).
Figure 8. Fuel Shutoff Solenoid.
0010
2. Using a digital multimeter, mea-
Resistance Less Than 3.5 Ohms -
sure resistance between fuel shut-
Fuel shutoff solenoid is faulty. Replace
off solenoid terminal 1 and
high-pressure fuel pump (WP 0142).
machine ground (WP 0007, Fig-
Replace fuel shutoff fuse and install
ure 3). Resistance should be 3.5 to
fuse panel cover (TM 5-2420-231-10).
7.8 ohms.
Proceed to Test Step 8.
Resistance 3.5 to 7.8 Ohms - Fuel
shutoff solenoid OK.
Proceed to step 3.
3. Disconnect front console wiring
harness connector (WP 0007, Fig-
ure 5) from main chassis wiring
harness connector (WP 0007, Fig-
ure 6).
