TM 5-2420-231-23-1
0083
Table 1. Ride Control Does Not Operate Correctly - Continued.
083
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. Using a digital multimeter, mea-
Voltage 10 to 14 Volts - Replace side
Ride Control Does Not
sure voltage between side console
options wiring harness (WP 0255).
Operate Correctly -
wiring harness connector (WP
Proceed to Test Step 14.
Continued
0007, Figure 45) terminal A and
Voltage Less Than 10 Volts - Proceed
machine ground. Voltage should
to Test Step 5.
be 10 to 14 volts.
Test Step 5. Test for Open Side
Console Wiring Harness.
1. Turn ignition switch to the off posi-
tion (TM 5-2420-231-10) and dis-
connect batteries (WP 0157).
2. Disconnect side console wiring
harness connector (WP 0007, Fig-
ure 24) from rear main chassis wir-
ing harness connector (WP 0007,
Figure 25).
3. Using a digital multimeter, mea-
Resistance 5.0 Ohms or Less -
sure resistance between side con-
Proceed to Test Step 6.
sole wiring harness connector (WP
Resistance Greater Than 5.0 Ohms -
0007, Figure 24) terminal 3M and
Replace side console wiring harness
side console wiring harness con-
(WP 0170).
nector (WP 0007, Figure 45) termi-
Proceed to Test Step 14.
nal A. Resistance should be 5.0
ohms or less.
Test Step 6. Test for Open Side
Console Wiring Harness.
1. Remove instrument panel front
cover (WP 0174).
2. Disconnect front console wiring
harness connector (WP 0007, Fig-
ure 5) from main chassis wiring
harness connector (WP 0007, Fig-
ure 6).
3. Using a digital multimeter, mea-
Resistance 5 Ohms or Less - Install
sure resistance between front con-
ride control fuse (TM 5-2420-231-10).
sole wiring harness connector (WP
Replace main chassis wiring harness
0007, Figure 5) terminal 3M and
(WP 0154).
front console wiring harness con-
Proceed to Test Step 14.
nector (WP 0007, Figure 70) termi-
Resistance Greater Than 5 Ohms -
nal 1C. Resistance should be 5
Replace front console wiring harness
ohms or less.
(WP 0162).
Proceed to Test Step 14.
0083-6