TM 5-2420-231-23-2
0092
ASSEMBLY CONTINUED
NOTE
Install cooling tubes as noted during removal.
The procedure for cooling tube removal and replacement is identical for left-hand and
right-hand side. Right-hand side is shown.
2. Install new O-ring (Figure 27, Item 1) and oil cooler tube fitting (Figure 27, Item 2) on transmission/hydraulic oil
cooler (Figure 27, Item 7).
3. Install oil cooler tube (Figure 27, Item 3) on oil cooler tube fitting (Figure 27, Item 2).
4. Install new O-ring (Figure 27, Item 4) and oil cooler tube fitting (Figure 27, Item 5) on transmission/hydraulic oil
cooler (Figure 27, Item 7).
5. Install oil cooler tube (Figure 27, Item 6) on transmission oil cooler outlet tube fitting (Figure 27, Item 5).
6. Repeat steps 2 through 5 for left side.
Figure 27. Transmission Oil Cooler Tubes.
0092