TM 5-2420-231-23-2
0092
DISASSEMBLY CONTINUED
NOTE
Note position and orientation of oil cooler and A/C condenser to aid in installation.
35. Remove four nuts (Figure 26, Item 2), washers (Figure 26, Item 3), and transmission/hydraulic oil cooler
(Figure 26, Item 1) from A/C condenser (Figure 26, Item 4).
Figure 26. Transmission/Hydraulic Oil Cooler.
0092
END OF TASK
CLEANING AND INSPECTION
0092
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
ASSEMBLY
0092
NOTE
Install oil cooler and A/C condenser in position and orientation noted during removal.
1. Install transmission/hydraulic oil cooler (Figure 26, Item 1), four washers (Figure 26, Item 3), and nuts
(Figure 26, Item 2) on A/C condenser (Figure 26, Item 4).