TM 5-2420-231-23-2
0092
ASSEMBLY CONTINUED
31. Install coolant reservoir (Figure 38, Item 3), coolant reservoir mount (Figure 38, Item 4), and wiper washer res-
ervoir (Figure 38, Item 2) on radiator (Figure 38, Item 5).
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may cause injury to personnel.
32. Position coolant suction tube (Figure 38, Item 8) aside, apply sealant to two bolts (Figure 38, Item 6), and
install two washers (Figure 38, Item 7) and bolts on radiator (Figure 38, Item 5).
33. Connect upper coolant suction hose (Figure 38, Item 9) and tighten clamp (Figure 38, Item 10) on coolant res-
ervoir (Figure 38, Item 3).
34. Install coolant reservoir cap (Figure 38, Item 1) on coolant reservoir (Figure 38, Item 3).
Figure 38. Coolant Reservoir and Mount.
0092
