TM 5-2420-231-23-2
0106
INSTALLATION
0106
1. Apply a light coat of oil to crankshaft.
CAUTION
Make sure pin on front snout of crankshaft aligns with hole in crankshaft front seal
installer. Failure to follow this caution may result in damage to machine.
2. Install new crankshaft front oil seal (Figure 3, Item 2) and crankshaft front seal installer (Figure 3, Item 1) on
engine.
3. Using crankshaft front seal installer (Figure 3, Item 1), install crankshaft front oil seal (Figure 3, Item 2) until
flush with engine.
4. Remove crankshaft front seal installer (Figure 3, Item 1).
Figure 3. Crankshaft Oil Seal Installation.
0106
END OF TASK
FOLLOW-ON TASKS
0106
1. Install crankshaft pulleys (WP 0118).
2. Install coolant pack (WP 0092).
END OF TASK
END OF WORK PACKAGE
0106-3/(4 blank)