TM 5-2420-231-23-2
0107
INSTALLATION CONTINUED
NOTE
Install bolts as noted during removal.
2. Install front cover (Figure 3, Item 5), five bolts (Figure 3, Item 1), and eight bolts (Figure 3, Item 4) on engine.
Tighten all bolts to 20 lb-ft (27 Nm).
3. Install idler pulley (Figure 3, Item 2) and tighten bolt (Figure 3, Item 3) on engine.
Figure 3. Front Cover.
0107
END OF TASK
FOLLOW-ON TASKS
0107
1. Install crankshaft front seal (WP 0106).
2. Install oil pan (WP 0105).
END OF TASK
END OF WORK PACKAGE
0107-3/(4 blank)