4
TM 5-2420-231-23-2
FIELD MAINTENANCE
-
WATER INLET HOUSING REPLACEMENT
0129
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
References - Continued
Tools and Special Tools
Tool Kit, General Mechanic's
WP 0374 (Group Number 0128 and 0841)
0
0
(WP 0376, Item 117)
Equipment Conditions
Materials/Parts
Alternator removed (WP 0153)
0
Rag, Wiping (WP 0375, Item 25)
Engine coolant drained (WP 0090)
0
0
Tape, Antiseizing Teflon (WP 0375, Item 34)
0
Estimated Time to Complete
Gasket
0
2.6 hr
0
References
WP 0369
0
REMOVAL
0129
1. Loosen clamp (Figure 1, Item 4) and disconnect lower radiator hose (Figure 1, Item 5) from water inlet housing
(Figure 1, Item 3). Position hose aside.
2. Loosen clamp (Figure 1, Item 8) and disconnect heater hose (Figure 1, Item 7) from fitting (Figure 1, Item 6).
Position hose aside.
3. Remove three bolts (Figure 1, Item 1), water inlet housing (Figure 1, Item 3), and gasket (Figure 1, Item 2)
from engine. Discard gasket.
Figure 1. Water Inlet Housing.
0129