TM 5-2420-231-23-2
0144
REMOVAL CONTINUED
7. Disconnect electrical connector (Figure 4, Item 2) from switch (Figure 4, Item 1).
8. Remove wiring harness (Figure 4, Item 3) from machine.
Figure 4. Wiring Harness.
0144
END OF TASK
CLEANING AND INSPECTION
0144
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0144
NOTE
Install tiedown straps in location and quantity noted during removal.
Install wires as tagged and marked during removal.
1. Position wiring harness (Figure 4, Item 3) on machine.
2. Connect electrical connector (Figure 4, Item 2) to switch (Figure 4, Item 1).
