TM 5-2420-231-23-2
0158
REMOVAL CONTINUED
10. Remove two bolts (Figure 4, Item 1) and washers (Figure 4, Item 2) from equalizer cover (Figure 4, Item 3).
11. Remove bolt (Figure 4, Item 5), washer (Figure 4, Item 4), and equalizer cover (Figure 4, Item 3) from machine.
Figure 4. Equalizer Cover.
0158
12. Position rubber boot (Figure 5, Item 3) aside.
13. Remove nut (Figure 5, Item 1) and disconnect 24-V battery cable (Figure 5, Item 14) from junction block
(Figure 5, Item 2).
14. Push 24-V battery cable (Figure 5, Item 14) through grommet hole (Figure 5, Item 13) and remove 24-V battery
cable from machine.
15. Remove nut (Figure 5, Item 6), lockwasher (Figure 5, Item 5), and disconnect 12-V battery cable (Figure 5,
Item 12) from equalizer (Figure 5, Item 4). Discard lockwasher.
16. Push 12-V battery cable (Figure 5, Item 12) through grommet hole (Figure 5, Item 13) and remove 12-V battery
cable from machine.
17. Remove nut (Figure 5, Item 10) and disconnect three ground cables (Figure 5, Items 7, 8, and 11) from stud
(Figure 5, Item 9).
18. Push ground cable (Figure 5, Item 7) through grommet hole (Figure 5, Item 13) and remove ground cable from
machine.
